Centre d’usinage haute production MITSUI SEIKI 5 axes modèle HU50-T avec 360 mm. Tableau simple de diamètre. (Changeur de palette axe C en option) et 50 Taper Spindle.
Commande numérique avec tous les équipements et fonctionnalités standard, notamment: Changeur d’outils automatique et capacité de production élevée pour le fraisage, le perçage, l’alésage, le taraudage et l’alésage 5 axes à grande vitesse. Circuit logique intégré, boucle fermée, équipement électrique complet pour fonctionnement sur: 3 phases, 50 / 60Hz, 200/220 Volts AC.
| Working Capacity | |
| Table longitudinal stroke (X axis) | 610 mm (24.02″)* |
| Spindle head vertical stroke (Y axis) | 700 mm (27.55″) |
| Column travel stroke (Z axis) | 650 mm (25.59″) |
| Interference of whole machine cover with work piece on pallet | |
| In machine | 500 mm diameter (19.6″ dia) |
| In Optional APC | 500 mm diameter (19.6″ dia) |
| Table (Standard Plain Table) | |
| Working surface | 360 mm Diameter. (14.1″) |
| B and C axis infinite | 0.001° (360,000 positions) |
| Max. permissible load on C-axis table | 200 kg (440 lb.) Within 411Nm (301 ft/lb) |
| Surface on plain table | M16 tapped holes |
| Table (Optional Pallet) | |
| Working surface | 400 x 400 mm (15.75″ x 15.75″) |
| B and C axis infinite | 0.001° (360,000 positions) |
| Positioning and clamping method of pallet | Taper cone x 4 |
| Max. permissible load on C-axis pallet | 100 kg (220 lb.) Within 147Nm (108 ft/lb) |
| Surface on pallet | M16 tapped hole, 24 places / 80mm grid hole pattern |
| Pallet Clamp Force | 7,600 kg. (16,700 lb.) |
| Pallet changing time | 25 seconds |
| Pallet weight | 100 kg. (220 lb.) |
| Feed Rate (X, Y, Z and B axes) Rapid traverse |
|
| X, Y and Z axes | 36,000 mm/min. (1,417 IPM) |
| B axis | 0.001°: 7,200°/min. (20 rpm) |
| C axis | 0.001°: 7,200°/min. (20 rpm) |
| Cutting feed | |
| X, Y and Z axes | 0.1~20,000 mm/min. (0.004~787 IPM) |
| B axis | 0.001°: 0.1~7,200°/min. |
| C axis | 0.001°: 0.1~7,200°/min. |
| Cutting feed | |
| X, Y and Z axes | 0.001 mm |
| B & C axis | 0.001° |
| Position Transducer | |
| X, Y and Z axes | Linear scale feedback system (Precision glass scale/standard) |
| B & C Axis | High Precision Rotary Glass Encoder |
| Power Required | |
| Electrical Service Required | AC 200/220V 3 phase 50/60 HZ 60 KVA |
| Air Required | |
| Air Service Required | 0.5 – 0.7 Mpa, 1.0 m3/min. (70 ~ 110 psi @ 42 cfm) (Dry and clean air) |
| Machine Dimensions (Machine, including OPTIONAL 4 APC and chip conveyor) |
|
| Length | 5,800 mm (229″) |
| Width | 3,930 mm (155″) |
| Height | 2,792 mm (110″) |
| Machine Weight | 15,500 kg. (34,000 lb.) |
| Numerical Control Equipment | |
| CNC Control | FANUC 30i MA |
État
Neuf
Marque
MITSUI SEIKI
Nombre d'axes
5 axes
Broche
Broche horizontale
Diamètre plateau
360
Course en X
600-800, 610
CN
Fanuc
HU50-T
vous intéresse ?
Site réalisé par
